Aluminum Bronzes
The aluminum bronzes are a family of copper-based alloys offering a combination of mechanical and chemical properties unmatched by any other alloy series.
High corrosion resistance and excellent hot formability for fabrication by hot forging and hot bending.
Norms
Description
Applications
Available Forms
UNS C62400
High corrosion resistance and excellent hot formability for fabrication by hot forging and hot bending.
-
Bearing & Bushings
-
Gears
-
Cams
-
Sleeves & Guides
-
Valve Seats
-
Valve Guides
-
Gibs & Slides
rough / semi / finished acc to drawing.
Chemical Composition
Mechanical Properties
Physical Properties
Delivery Conditions
Al
Fe
Mn
Others
Cu
10 %
3 %
1.5 %
1 %
Balance
Hardness
Tensile Strength
Yield Strength
Elongation (L=5D)
140 - 180 HB
650 - 750 N/mm2
350 - 380 N/mm2
> 14 %
min. 12 % IACS
63 W/mK
7.45 g/cm3
Electrical Conductivity
Thermal Conductivity
Density
Forged (additionally heat treated on request)
Norms
Description
Applications
Available Forms
UNS C95900
Extremely hard and wear resistant bronze used for low speeds and very high load bearing applications.
-
Bending Dies
-
Wiper Dies and Mandrels
-
Wear & Guide Plates
-
Aircraft Landing Gear Bearings
-
Gear Wheels
rough / semi / finished acc to drawing.
Chemical Composition
Mechanical Properties
Physical Properties
Delivery Conditions
Al
Fe
Mn
Others
Cu
14 %
4 %
1.5 %
1 %
Balance
Hardness
Tensile Strength
Yield Strength
Elongation (L=5D)
360 - 400 HB
550 - 700 N/mm2
500 - 600 N/mm2
> 1 %
min. 8 % IACS
50 W/mK
7.25 g/cm3
Electrical Conductivity
Thermal Conductivity
Density
Forged (additionally heat treated on request)
Norms
Description
Applications
Available Forms
UNS C63000
Excellent choice for applications involving heavy loads, abrasive wear resistant, friction, abrasive wear and corrosion.
-
Bending Dies
-
Wiper Dies and Mandrels
-
Wear & Guide Plates
-
Aircraft Landing Gear Bearings
-
Gear Wheels
rough / semi / finished acc to drawing.
Chemical Composition
Mechanical Properties
Physical Properties
Delivery Conditions
Al
Fe
Ni
Mn
Cu
10 %
4.8 %
5 %
1.5 %
Balance
Hardness
Tensile Strength
Yield Strength
Elongation (L=5D)
200 - 240 HB
750 - 950 N/mm2
500 - 700 N/mm2
> 4 %
min. 8 % IACS
42 W/mK
7.45 g/cm3
Electrical Conductivity
Thermal Conductivity
Density
Forged (additionally heat treated on request)